Key stakeholders in the aviation and wireless industries identified a series of steps that will continue to protect commercial air travel from disruption by 5G C-band interference while also enabling Verizon and AT&T to enhance service around certain airports.
NWSA Reaches Major Milestone, Eclipsing 10,000 Certifications IssuedAirbus and Partners Integrate Mission Critical Services on 5G-EPICENTRE Project
EWA Elects New Board Members and Officers
“We believe we have identified a path that will continue to enable aviation and 5G C-band wireless to safely co-exist,” said Acting Federal Aviation Administration (FAA) Administrator Billy Nolen. “We appreciate the willingness of Verizon and AT&T to continue this important and productive collaboration with the aviation industry.”
The phased approach requires operators of regional aircraft with radio altimeters most susceptible to interference to retrofit them with radio frequency filters by the end of 2022. This work has already begun and will continue on an expedited basis, the FAA said.
At the same time, the FAA worked with the wireless companies to identify airports around which their service can be enhanced with the least risk of disrupting flight schedules. During initial negotiations in January, the wireless companies offered to keep mitigations in place until July 5, while they worked with the FAA to better understand the effects of 5G C-band signals on sensitive aviation instruments.
Based on progress achieved during a series of stakeholder roundtable meetings, the wireless companies offered Friday to continue with some level of voluntary mitigations for another year.
“We all agreed when we began these meetings that our goal was to make July 5, 2022, just another date on the calendar, and this plan makes that possible,” Nolen said.
Airlines and other operators of aircraft equipped with the affected radio altimeters must install filters or other enhancements as soon as possible. Filters and replacement units for the mainline commercial fleet should be available on a schedule that would permit the work to be largely completed by July 2023. After that time, the wireless companies expect to operate their networks in urban areas with minimal restrictions.
The radio-altimeter manufacturers have worked quickly with Embraer, Boeing, Airbus and Mitsubishi Heavy Industries to develop and test filters and installation kits for these aircraft. Customers are receiving the first kits now. In most cases, the kits can be installed in a few hours at airline maintenance facilities.
Throughout this process, the FAA will work with both industries to track the pace of the radio altimeter retrofits while also working with the wireless companies to relax mitigations around key airports in carefully considered phases.
The agency will continue to engage with the National Telecommunications and Information Administration (NTIA) and the FCC on technical issues associated with these efforts.
“Today’s announcement identifies a path forward that will enable Verizon to make full use of our C-Band spectrum for 5G around airports on an accelerated and defined schedule,” said Craig Silliman, executive vice president and chief administrative officer for Verizon. “Under this agreement reached with the FAA, we will lift the voluntary limitations on our 5G network deployment around airports in a staged approach over the coming months meaning even more consumers and businesses will benefit from the tremendous capabilities of 5G technology. This progress is the result of months of close collaboration with the FAA, FCC and aviation industry, and sets the stage for continued, robust 5G deployment.”
Would you like to comment on this story? Find our comments system below.